A) The Process of Imen Energy Shargh Co.

1- Automatic Cutting

In this stage cutting of glass is done by an automatic cutting machine. It is possible to from different shapes of the glass by using a special software.

Automatic Cutting Table

2- Bending of Spacer

Aluminum frames used in producing of double glazing glass are easily bendable. The frame which is used between two glasses is quite integreted and due to the size and frame of glass it is bendable.

Automatic Spacer Bending Machine

3- Injection of Wetnessless Material

As spacer is like a profil, this vacant space must be filled with wetnessless material. The reason for using this material is that the space between two glasses must be quite dry and without any moisture.

A Machine for Injection of Molcularsieve

4- Washing the Glass Automatically

The glass is washed quite automatically in a glass washing machine. The used water is devoid of any grossness to remove spot or oil on the glass. On the next stage, the glass will enter quite automatically to the drier part of machine to dry it and remove all the water spot.

Automatic Washing Machine

5- Assembeling Aluminum Frame on the Glass

In this stage, the glass is washed and dried completely. The aluminum frame is conveyed from botyl machine to this place by an automatic conveyor to be installed on the glass.

Glass & Spacer Assembeling Machine

6- Pressing Stage and Assembeling of Two Glasses

In this stage after installing of Spacer^,s frame on the glass, the glass is entered automatically to the pressing machine. When the rim of the glasses are parallel, two glasses are pressed.

Automatic Pressing Machine

7- Caulking and injection

In this stage, two sides of the frame is covered by botyl glue (ISO Botyl) to stick the glass on the spacer^,s frame. This is done quite automatically. The glue must have an equal surface and a certain thickness. Two glasses are placed on the frame horizontally.

Automatic Botyl Machine.

8- Injection of Argon Gaz to the Space Between Two Glasses

The space between two glasses is filled automatically with an ineffective gaz like Argon or SF6 to produce a space quite devoid of coolness, hotness and noise. Argon gaz is a temporal insulator and SF6 gaz is a vocal insulator.

Gaz Injection Machine

9- Caulking Stage and Injection of Polisolfide

In this stage, the polisolfide and related hardner are integrated quite automatically and injected to outer edge between two glasses. This is done to make the space between two glasses quite impenetrable.

Polysolfide Injection Machine

B) The Process of Shargh Safety Glass Co.

Shargh Safety Glass Co.

This company is proud to be in services of engineers and company architects as a pioneer of industry in production of bending and float tempering glass with horizontal furnace. The glass specifications are as follow:

Bending and Float Glass with Horizontal Furnace:

Size (Max): 2450*2650 mm

Size (min): 50*270 mm

Bending Radius (min): 1000 mm

Height of arc (Max): 700 mm

Shargh Safety Glass Co.

This Company with horizontal furnace and new and modern machines is in services of factories which are producing heater and gaz oven to supply its production with best quality. It also produce the glass with printed design on it.

Shargh Safety Glass Co.

This company can produce different bending and float laminet glasses for buses, minibuses and cars.

Shargh Safety Glass Co.

This company has the first standard seal for 10 mm building glasses. The standard code from Iran standard institute is 2385.

Automatic Washing Machine:

This machine wash the cutting glass in different sizes with pure water then dry it and promote quality of the glass.